Products
CM Model ER Truck Bed
Available Sizes 8'-6" length 9’-4” length
Design Features & Hardware
- All steel frame construction
- 4" steel channel frame rails
- 3" steel roll-formed 3/16" channel crossmembers
- Steel tubing headache rack with round "easy view" window grill
- 1/8" steel tread plate deckTrough
- 4 – flush-mounted tie downs
- Dovetail
- Full length side skirt with stainless fenders and aluminum tread plate trim
- 4 – lockable flush-mounted tool boxes, 2 per side, located in front and rear of wheel well
- Angled fuel fill (cast aluminum)
- Full length rear skirt
- Rear bed corners tapered for turning radius
- Rear bumper with aluminum tread plate trim
- Aluminum cast lights and tag insert
- Full access receiver mount
- Premium TGIC Polyester powdercoating: black
Lights
- LED recessed tail, brake, and back up lights mounted in headache rackLights
- 2 – LED recessed tail, brake, and back up lights mounted in headache rack
- Stop, turn, tail, back up, and tag lights in skirt
- DOT required lighting (clearance and marker lights)
- All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer.
- Stop, turn, tail, back up, and tag lights in skirt
- DOT required lighting (clearance and marker lights)
- All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer.
RC 40 Hydraulic Driven Reciprocating
Air Compressor
- Reciprocating type
- Integral hydraulic oil cooler
- Available with open or closed hydraulic manifold block
- V-Belts driven by hydraulic motor
- Added features:
- Powder-coated, galvanneal sheetmetal enclosure
- Designed with (3) v-belts for maximum productivity
- Rugged, cast-iron crankcase
- Corrosion-resistant steel valves
- Tapered roller-type main bearings
- Balanced crankshaft
- Weight-matched balanced pistons
- High-flow valves
- Lightweight connecting rods
- Integrated hydraulic cooler
- Open and closed center
- Supply connections:
- Hydraulic oil in – 3/4” 37° JIC
- Hydraulic oil out – 1” 37° JIC
- Case drain – 1/4” 37° JIC
- Electrical 12-volt DC or 24 volt
- Vibration isolation for air compressor and drive system for quiet operation
Air Compressor Control System
- Integral on-off manifold with solenoid diverter valve and hydraulic pressure relief valves
Safety Equipment
- Air pressure-relief safety valve
- Hydraulic oil pressure-relief valve
Options/Accessories
- Filter/lubricator/regulator (FLR)
- Air hoses, hose reels, and fittings
- 20, 30, or 60 gallon air reservoirs
HYDRAULIC SYSTEM RECOMMENDATIONS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic oil cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
*Allow for adequate ventilation
Tiger Hydraulic Driven Rotary Screw – 30 to 45 CFM
Rotary Screw Reliability
For applications where truck-bed space is at a premium and powerful performance is a requirement, upgrade your reciprocating compressor to Vanair’s Tiger hydraulic-driven rotary screw air compressor. Ideal for applications in the tire and mechanic service markets, the Tiger combines heavy duty performance in a vehicle-mounted design, offering the power you need for virtually any application.
Compressor Dimensions with fittings (in.) –
35.75L x 17.5W x 19.25H*
Dry Weight (lbs.) – 350 lbs
Compressor
- Cold weather package to prevent freeze-ups
- Gear-type hydraulic motor
- Encapsulated oil-injected rotary screw
- Powder-coated, galvanneal sheetmetal enclosure
- Spin-on air-oil separating element
- Ambient operating range: -20°F to +110°F
- On-off solenoid valve
- Air-to-oil compressor fluid cooler
- Integral hydraulic cooler
- Supply connections
- Hydraulic oil in – 3/4” 37° JIC
- Hydraulic oil out – 1” 37° JIC
- Electrical 12-volt DC/24-volt DC
Safety Equipment
- High-temperature shutdown
- High-pressure shutdown
- Air pressure-relief safety valve
- Automatic blowdown on shutdown
- Oil fill plug safety relief
Instrumentation
- Conveniently located, easy-to-read instrumentation panel features an hour meter, temperature gauge, and pressure gauge
Options/Accessories
- Service/control line moisture separators
- Filter/lubricator/regulator (FLR)
- Air hoses, hose reels, and fittings
- OSHA safety valve (velocity fuse)
- Sullair® air tools
- Tool oiler/lubricator
- Post drivers
HYDRAULIC SYSTEM REQUIREMENTS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
*Allow for adequate ventilation.
Viking Hydraulic – 40 to 65 CFM
Power and Versatility
For applications where truck-bed space is at a premium and powerful performance is a requirement, rely on Vanair’s Viking Hydraulic-Powered Rotary Screw Air Compressor. With a variety of capacities ranging from 40 - 65 cfm at 100 to 175 psi, there’s a Viking 65 on the market to meet your needs.
Compressor Dimensions with fittings (in.) –
37.3L x 20.5W x 27.0H
Dry Weight (lbs.) – 380 lbs.
Compressor
- Gear-type hydraulic motor
- Encapsulated oil-injected rotary screw
- Powder-coated, galvanneal sheetmetal enclosure
- Spin-on, air-oil separating element
- On-off solenoid valve
- Air-to-oil compressor fluid cooler
- Integral hydraulic cooler
- Ambient operating range: -20°F to +110°F
- Supply connections
- Hydraulic oil in – 3/4" 37º JIC
- Hydraulic oil out – 1" 37º JIC
- Electrical 12-volt DC/24-volt DC
Safety Equipment
- High-temperature shutdown
- High-pressure shutdown
- Air pressure-relief safety valve
- Automatic blowdown on shutdown
- Oil fill plug safety relief
Instrumentation
- Conveniently located, easy-to-read instrumentation panel features an hour meter, temperature gauge, and pressure gauge
Options/Accessories
- Service/control line moisture separators
- Filter/ lubricator/ regulator (FLR)
- Air hoses, hose reels, and fittings
- OSHA safety valve (velocity fuse)
- Sullair® air tools
- Tool Oil Line Lubricator
- Post drivers
HYDRAULIC SYSTEM REQUIREMENTS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
Vanair ADHD – 125 to 185 CFM
Hydraulic Drive Simplicity...Big Air Power
The compressor unit in the ADHD series is directly coupled to a hydraulic motor. Since there are no drivelines or V-belts, the ADHD can be located anywhere on the truck bed. This simple design along with Sullair® rotary screw technology makes this unit the most powerful, versatile modular air compressor in the mobile market.
Compressor Dimensions – (All Models)
Assembly with Side-Mount
Receiver with fittings (in.) –41.5L x 39W x 30H
Assembly with Vertically Stacked
Receiver with fittings (in.) –41.5L x 30.5W x 45.5H
Compressor
- Vanguard™ Lifetime Warranty on air end
- Direct coupled to a gear-type hydraulic motor
- Side-mounted or vertically stacked receiver/oil sump
- Powder-coated, galvanneal sheetmetal enclosure
- Oil-injected Sullair® rotary screw air end
Integrated Inlet Control
- Eliminates bolt-on designs
Safety Equipment
- High-temperature shutdown
- High-pressure shutdown
- Air pressure-relief safety valve
- Minimum pressure valve
- Automatic blowdown on shutdown
- Oil fill plug safety relief
Instrumentation
- Conveniently located, easy-to-read instrumentation panel features an hour meter, pressure gauge, and temperature gauge
Integrated Inlet Control
- Eliminates bolt-on designs
Options/Accessories
- Dual pressure
- Service/control line moisture separators
- Filter/lubricator/regulator (FLR)
- Air hoses, hose reels, and fittings
- OSHA safety valve (velocity fuse)
- Sullair® air tools
- Tool Oil Lube Lubricator
- Post drivers
- Aftercoolers
HYDRAULIC SYSTEM REQUIREMENTS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
Allow for adequate ventilation.
Tractor Pac 130 CFM
PTO-Driven Rotary Screw Compressor Package Quick and Easy Mounting on Your Tractor’s 3-Point Hitch
Vanair’s Tractor-Pac is a totally self-contained PTO-driven rotary screw compressor package designed for quick and easy mounting on your tractor’s 3-point hitch. Deriving its power directly from the tractor’s PTO, the lightweight simple design allows for easy service and maintenance and requires no electrical controls or connections. The Vanair Tractor- Pac comes with the industry’s only Lifetime warranty on its air end.
Compressor Dimensions with fittings (in.) – 34L x 34W x 49H
SPECIAL FEATURES
- Rugged skid mounting ideal for harsh off-road conditions
- Lightweight, compact design
- Easy service and maintenance
OPTIONS
- Class 1 hitch
NOTES: Options available for 125 or 150 psi models. Additional HP is needed for 125/150 psi. 1000 RPM tractor PTO is required for proper compressor input speed.
Viper Hydraulic – 40 to 85 CFM
The Industry's Most Powerful Abovedeck Air Compressor
The Viper Hydraulic Rotary Screw Abovedeck is a high-performance air compressor that delivers proven performance for virtually any application. Offering 40-85 cfm and 100-150 psi, this compact, hydraulic powered unit offers the versatility and sheer power to match the task at hand.
Both Models - Compressor Dimensions with fittings (in.) – 42.2L x 20.0W x 21.0H*
Dry Weight (lbs.) – 370 lbs.
Rotary Screw Air Compressor
- Vanguard™ Lifetime Warranty on air end
- Gear-type hydraulic motor
- Oil-injected, Sullair® rotary screw air end
- Powder-coated, galvanneal sheet metal enclosure
- Air to oil compressor fluid cooler
- Ambient operating range: -20°F to +110°F
- Electrical 12-volt DC/24-volt DC
- Supply connections
- Hydraulic oil in – 3/4" 37º JIC
- Hydraulic oil out – 1" 37º JIC
Integrated Inlet Control
- Eliminates bolt-on designs
Safety Equipment
- High-temperature shutdown
- Air pressure-relief safety valve
- Minimum pressure orifice
- Automatic blowdown on shutdown
- Oil fill plug safety relief
Instrumentation
- Conveniently located, easy-to-read instrumentation panel features an hour meter and pressure gauge
Options/Accessories
- Service/control line moisture separators
- Filter/lubricator/regulator (FLR)
- OSHA safety valve (velocity fuse)
- Air hoses, hose reels, and fittings
- Tool Oil Line Lubricator
- Post drivers
HYDRAULIC SYSTEM REQUIREMENTS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
*Allow for adequote ventilation.
Viper Diesel – 80 CFM
Introducing the New Viper Diesel Portable Air Compressor
Vanair is once again meeting the markets demand with the introduction of the Viper Diesel 80 cfm air compressor with infinitely variable throttle control to reduce fuel consumption. Powerful enough to operate most 90 lb jack hammers, the rugged system is small enough to fit behind the cab of your vehicle or be mounted on the sidepack. Completely self-contained and easily transferable via a lifting bail, the Viper diesel provides you with the air power you need, when and where you need it without vehicle and/or engine modification. The Viper features a tier 4 certified Kubota engine and reduces your vehicle's idle time – saving fuel and extending your vehicles engine lifespan.
Compressor Dimensions with fittings (in.) – 47L x 21W x 33H
Dry Weight (lbs.) –800 lbs.
Compressor
- Lifetime Warranty on air end
- Direct drive - no belts
- Oil injected rotary screw air end encapsulated
- Powder-coated, galvanneal sheetmetal enclosure
- Spin-on air-oil separating element
- Lifting bail
Engine
- Make: Kubota tier 4 certified
- Fuel type: diesel
- Engine type: 3 cylinder
- Horsepower: 24.8 HP
- Fuel tank capacity: 9 US gal.
- Glow plugs for engine starting
Safety Equipment
- High-temperature shutdown compressor and engine
- Low engine oil pressure shutdown
- Air pressure-relief safety valve
- Minimum pressure orifice
- Automatic blowdown on shutdown
- Oil fill plug safety relief
Instrumentation
- Conveniently located electronic easy-to-start instrumentation panel features an hour meter, pressure and temperature readout, fuel gauge and engine rpm
- Control panel can be remote mounted with extension harness
Options/Accessories
- Service/control line moisture separators
- Filter/lubricator/regulator (FLR)
- Air hoses, hose reels, and fittings
- OSHA safety valve (velocity fuse)
- Tool oiler/lubricator
- Post drivers
- Casters
- Cold weather package to prevent freeze-ups
- Remote instrument panel
- After cooler
- Remote fuel option
Maintenance
- Easy service access - removable front panel and hinged top for serviceability
Additional Features
- Cooling baffle ensures ventilation, protects machine from debris and reduces noise
- Engine driven fan allows extra DC power for after cooler use
- Infinetly variable throttle control reduces fuel consumption
CM Model TM Truck Bed
Available Sizes 8'-6" length 9'-4" length 11'-4" length
Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel roll-formed 3/16" channel crossmembers
Steel tubing headache rack with round "easy view" window grill
1/8" steel tread plate deck
Recessed gooseneck ball mounting box with easy access removable cover and 2 safety chain loops
Full length side skirt with rolled fenders and aluminum tread plate trim
3 – lockable tool boxes with paddle handle rotary latches on front, top, and up behind each side
Angled fuel fill
Full length rear skirt
Rear bed corners tapered for turning radius
Rear bumper with aluminum tread plate trim
Full access receiver mount
Premium TGIC Polyester powdercoating: black
Lights
2 – recessed tail, brake and back up lights mounted in headache rack
Cargo light with toggle switch
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
CM Model SK Truck Bed
SK MODEL: Standard Features
Available Sizes 8'-6" length 9'-4" length 11'-4" length
Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel roll-formed 3/16" channel crossmembers
Steel tubing headache rack with round "easy view" window grill
1/8" steel tread plate deck
Recessed gooseneck ball mounting box with easy access removable cover and 2 safety chain loops
Full length side skirt with rolled fenders and aluminum tread plate trim
Side rub rails with stake pockets
Removable 4" tall side rails
2 – lockable flush-mounted tool boxes with paddle handle rotary latches, 1 per side, located in front of wheel well
Angled fuel fill
Full length rear skirt
Rear bed corners tapered for turning radius
Rear bumper with aluminum tread plate trim
Full access receiver mount
Premium TGIC Polyester powdercoating: black
Lights
2 – recessed tail, brake and back up lights mounted in headache rack
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
CM Model RD Truck Bed
Available Sizes 8'-6" length 9'-4" length 11'-4" length
Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel roll-formed 3/16" channel crossmembers
Steel tubing headache rack with round "easy view" window grill
1/8" steel tread plate deck
Recessed gooseneck ball mounting box with easy access removable cover and 2 safety chain loops
Steel tread plate side with rub rail and stake pockets
Removable 4" tall side rails
Angled fuel fill
Steel tread plate solid rear skirt
5” steel channel frame drop hitch with full access receiver mount and 2 punched safety chain holes
Premium TGIC Polyester powdercoating: black
Lights
2 – recessed tail, brake, and back up lights mounted in headache rack
Stop, turn, tail, back up, and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
CM Model SS Truck Bed
SS MODEL: Standard Features
Available Sizes 8’-6” length 9’-4” length 11’-4” length
Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel roll-formed 3/16" channel crossmembers
Steel tubing headache rack with round "easy view" window grill
1/8" steel tread plate deck
Recessed gooseneck ball mounting box with easy access removable cover and 2 safety chain loops
Smooth side rails with internal stake pockets
Removable 4" tall side rails
Angled fuel fill
Solid rear skirt
5" steel channel frame drop hitch with full access receiver mount and 2 punched safety chain holes
Premium TGIC Polyester powdercoating: black
Lights
2 – recessed tail, brake and back up lights mounted in headache rack
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
CM Model SS-AL Aluminum Truck Bed
SS AL MODEL: Standard Features
Available Sizes
84” length
8’-6” length
9’-4” length
11’-4” length
Design Features & Hardware
All Steel Subframe construction
4" Steel channel frame rails
3" Steel channel cross members
1/8" aluminum tread plate deck
aluminum tubing headache rack with round "easy view" window grill
Smooth side rails with four 360 Degree Swivel Tie Downs
Angled fuel fill
5" aluminum channel frame drop hitch with full access receiver mount and two punched safety chain holes
Lights
Two recessed tail, brake and back up lights mounted in headache rack
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
CM Model GP Truck Bed
Available Sizes
8’-6” length9’-4” length11’-4” length
Design Features & Hardware
All steel frame construction
6" steel channel frame rails
3" steel roll-formed 3/16" channel crossmembers on 12" centers
Steel tubing headache rack with round “easy view” window grill
1/8" steel tread plate deck
Side and rear internal stake pockets
Removable 4” tall side rails
4” gin pole troughs on the sides
3/16” smooth rear skirt
2 - Schedule 80 gin poles (8' on 8'-6" model, 9' on 9'-4" model, and 11' on 11'-4" model)
5” steel channel frame drop hitch with full access receiver mount and 2 punched safety chain holes
Premium TGIC Polyester powdercoating: black
Lights
2 – recessed tail, brake, and back up lights mounted in headache rack
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance and marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer
14,005H Telescoping Crane- 70,000 ft./lb. Crane Rating
Application:
Field service and installation
Gas distribution service and installation
Highway sign and roadside park maintenance
Mining
Monument/burial vault companies
Pipeline companies
Railroad signal departments and track maintenance
Waste water treatment
Workboats and barges
Specifications: Weight 3,200 lbs. -- 1,454 kgs
Length 15' 9" -- 4.8 m
Width 2' 3" -- 0.67 m
Height 3' 3" -- 0.97 m
Base Plate 20 1/2" x 24 1/2" -- (52.1 cm x 62.2 cm)
Hydraulic Systems Requirements 15 gallons (56.9 L) per minute, at 2800 psi (193.0 bar)
Features: